Toilet: How Do You Stop It From Running
The toilet will usually tell you when something is wrong. It will run continually or flush inefficiently. We’ll give you some quick tips. If you run into any problems then please
call Service Network at (303) 750-4242 or click to request service on-line
and we’ll dispatch a professional plumbing technician to solve this pesky problem.
First and foremost, it is important to keep the toilet free of clogs.
Do not put any objects other than what the toilet is intended for into it. This includes "the business" and toilet paper. Any other items should be placed in the trash.
To prevent people putting objects into the toilet that do not belong there, keep a small trash can near the toilet to encourage the throwing away any non-toilet friendly items.
Toilet Keeps Running
How to Stop your toilet from running constantly:
First, check the float ball. If it is submerged more than halfway in the water, it is waterlogged and can't rise high enough to shut off the fill valve. Replace the ball.
Check the guide arm to make sure it's not binding on the inside of the tank or the overflow tube. If it is, straighten the guide arm.
If the float ball and guide arm are operating properly, adjust the water level by bending the guide arm or turning the adjustment screws on the fill valve. Flush the toilet and recheck the water level. When it is adjusted correctly, the water level will be even with the fill line on the tank or overflow tube.
Service or replace the fill valve. Turn off the water supply and flush. Open the fill valve, rinse the parts and replace any worn seals. On plunger types, loosen the thumbscrews to slide out the float arm and lift out the plunger. On diaphragm types, remove the top screws. On float-cup types, remove the cap and push down on the top assembly as you unscrew it. To replace a fill valve, sponge out the tank, remove the refill tube and then disconnect the water-supply tube's coupling nut and the mounting nut with channel-type pliers. Reverse the procedure to install. Check the manufacturer's instructions to locate the fill valve's critical level, which must be a minimum of 1 inch (2.5 cm) higher than the top of the overflow tube. Most replacement fill valves are adjustable in height.
Just remember, when all else fails, the professionals of Service Network are standing by.....
call Service Network at (303) 750-4242 or click this link to request service on-line
Plumbing-Heating-Air Conditioning-Evaporative Cooling-Drain Cleaning-Water Heaters-Gas Lines-Sewer Line-Water Lines-Boilers-Humidifiers-Electronic Air Cleaners-Thermostats
Servicing the entire Denver metro area:
Denver - Aurora- Greenwood Village- Broomfield - Boulder - Englewood - Westminster - Northglen - Wheat Ridge - Parker - Highlands Ranch - Lakewood - Littleton - Castle Rock